Plasma Torch

[Dembo]

Somebody have any idea of how to build a plasma torch (stand up) for a cnc X Y table.
I have already the plasma cutter, with a manual plasma torch.

[Weldtutor]

Hi Dembo
Welcome to CNC Zone.

The link below has some conversion information & a picture in post #3
http://www.cnczone.com/forums/showth...rch+conversion

Post #18 of this next thread also has a picture of a hand to machine torch conversion.
http://www.cnczone.com/forums/showth...ht=chain+drive

[Weldtutor]

Originally Posted by Dembo how to build a plasma torch (stand up) for a cnc X Y table. I have already the plasma cutter, with a manual plasma torch.

Another possibility is to use your manual torch on the machine.
Post #48 of the link below, shows a method of mounting it for CNC use.
http://www.cnczone.com/forums/showth...4&page=4&pp=15
..

[Dembo]

This picture is really helpfully.
I try to build one with the consumables I already have.

Thanks weldtutor

[Weldtutor]

Originally Posted by Dembo I try to build one

I wish you well in building it. Please post a picture when finished.
Do you have pictures of your plasma table you can post also?

[hrfab]

ebay have the plans. "machine torch"