FNC files for letters (ficep)

[speedingslug]

I used to run a Ficep Saw/drill & Plasma/drill line, so out of boredom wrote a php program to burn the letters of the alphabet in a beam. Most letters are the except a couple (laid off).

So just input the letters and submit, the next screen gives you the cam.
Then open a notepad file copy and paste the information in and save the file as a .fnc
Next save the file in the import folder.
go to archive and import the file
you may want to alter some of the ORG's to place the letters better but it should be fairly straight forward from here.

http://www.barrymercer.com/ficep/letters.php