Build Thread- 4'x8' with wide gantry

[NorthridgeFab]

I figured I would go ahead and start my build thread. Still waiting on parts to get here. Hope to start on the table this week. I currently am running a PlasmaCAM which is what the new table will replace.

Spec's:

64''x103'' Cutting Area
Gantry will be across the 103'' axis
Water Table
HiWIN 30mm linear guides on X & Y Axis's
HiWIN 15mm linear guides on Z & Floating Head
CandCNC Bladerunner w/620oz steppers, MP3000 THC

I will be building the table so that at a later time I can add a tube cutter on the same axis as the gantry. So the gantry will travel past the table to cut the tube.

[LouF]

Nice I am looking forward to following your build..

[NorthridgeFab]

Got started on the table tonight.

[LouF]

Good pics that is a big cutting area..

[RedskinsJBS]

Sweet! I love seeing the big machines come together.

Would mind elaborating on why you chose to make the gantry across the long axis?

[NorthridgeFab]

I went with gantry on the long axis for 2 reasons. First so the table can be push against the wall to help utilize floor space better and to load sheets from the side easier. Second so when I add the tube cutter I will be able to cut up to 8' of tubing.

[4R8]

Ooh, nice. I'll be watching this one for sure.
I've started my own build after getting sick of using a mates. I'm waiting till I get started on the actual build before posting but I do like your long axis gantry idea. I'm at a 5x5 plan right now unless I can clear out a vehicle or two from the shop. Then i may go bigger.

Keep the pics coming! Everyone likes pictures!

[RealmSteel]

Nice.

I'm interested if you have come up with anything on a rotary chuck for the future pipe cutting?

[NorthridgeFab]

Originally Posted by 4R8 Ooh, nice. I'll be watching this one for sure. I've started my own build after getting sick of using a mates. I'm waiting till I get started on the actual build before posting but I do like your long axis gantry idea. I'm at a 5x5 plan right now unless I can clear out a vehicle or two from the shop. Then i may go bigger. Keep the pics coming! Everyone likes pictures!

I've been working on, it should have some more pictures tomorrow.

Originally Posted by RealmSteel Nice. I'm interested if you have come up with anything on a rotary chuck for the future pipe cutting?

Surplus Center gear reduction w/ a shaft mount chuck is the plan.

[NorthridgeFab]

Got more done on the table

[NorthridgeFab]

Got more done on the table

[LouF]

Very nice that is a beast any idea around how heavy that will be when completed?