| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Plasma and Waterjet Machines Discuss building, operating CNC Plasma, waterjet and EDM machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-21-2011, 09:57 AM
| |||
| |||
We have a Hypertherm HD1071 w/ A D-11 controller and a rsvp301 Torch Height Control. Having problems with the torch dragging the plate about 1" after it does its pierce and starts its cut path. It does not do this every time. We have M51 programed at the start . Torch comes down, touches the plate ,pierces fine but when it should drop to the cut height it drops too far.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Innerlogic THC | Jonp | CNC Plasma and Waterjet Machines | 3 | 04-04-2010 11:21 AM |
| | |
Linear Mode
