LinkBack URL
About LinkBacks
What's a reasonable price? The only really quiet spindles are the chinese water cooled ones.
However, with my PC 892 at it's slowest setting, the cutting noise is louder than the router.
| | |
Hello,
I am looking for the quietest possible spindle at reasonable price for a DIY small MDF CNC router machine (maximum working area 12"x12").
Thanks,
What's a reasonable price? The only really quiet spindles are the chinese water cooled ones.
However, with my PC 892 at it's slowest setting, the cutting noise is louder than the router.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I would say less than $1000 and not water cooled. Right now, I have a cheap router from hardware store and it is very loud.
Thanks.
You can get an air cooled 1.5Kw chinese spindle on Ebay.
http://cgi.ebay.com/NEW-AIR-COOLE-MO...item5ad4486663
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
You can get an air cooled 1.5Kw chinese spindle on Ebay.
http://cgi.ebay.com/NEW-AIR-COOLE-MO...item5ad4486663
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks for the information. I did not see any specs on noise.
Posting Permissions
| | |
