| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Machining Centers Discuss wood cutting CNC machining centers, and Point-to-Point machines here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-20-2009, 04:20 PM
| |||
| |||
Hello, I'm new to CNCZone. Looks like a LOT of good info on here. I was wondering if anyone was using a speedy 315. I purchased one a few weeks ago and need a little help with a few error codes. Thanks in advance, Mike    |
|
#2
07-20-2009, 05:05 PM
| ||||
| ||||
| Type "e" when the error shows up and you *should* see a list of error codes, and an explanation of what they are. Provided it's similar to our 327, but it may not be.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
07-20-2009, 09:00 PM
| |||
| |||
| Thanks I'll try that in the am. Hopefully it will show what they are then. The manual has no reference to these error codes I'm getting.. In the Program mode it is 2111 and I can't get past that to change anything and I also have one in disk mgmt of 2114... Mike |
|
#4
07-20-2009, 10:13 PM
| ||||
| ||||
| Those seem to be different than the ones we have. Ours says File management, and I've never seen an error code there.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Masterwood/Holzher project 316-K Help | moultim | CNC Machining Centers | 5 | 07-27-2011 07:19 PM |
| Masterwood Project 319-323 | Tarpin | Commercial CNC Wood Routers | 7 | 01-28-2011 09:16 PM |
| Need Help!- masterwood | gcc | Commercial CNC Wood Routers | 7 | 04-14-2010 04:28 PM |
| 'MasterWood UK' fan club. | thinkingcnc | CNC Machining Centers | 90 | 10-18-2009 08:28 PM |
| looking for artcam post for masterwood cnc | JAMJAM692 | Post Processor Files | 1 | 04-13-2009 09:27 PM |
| | |
Linear Mode
