| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Machining Centers Discuss wood cutting CNC machining centers, and Point-to-Point machines here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-28-2008, 02:02 AM
| |||
| |||
Greetings to all I have a Oerlikon B24 with fanuc control 180 MC. It sends the 416 disconnect alarm. I found the TGAL parameter and I actived it. The alarm changes to 414overcurrent alarm and I noticed that the axis vibrates. I thought that it was a mechanical problem and I replaced the ball screw. I tried a MDI program, moving the axis in all its distance (home and negative stroke limit) using the following program and it didn't vibrate. M46 M48 G00 Z0 F254; Z-150.; M99; but when I run the program in auto mode, the axis begins to vibrate again. In auto mode always it vibrate in the begining of the program. M46 M48 G00 F7.5 G64 D1 X-0.321 Y2.5621 Z-1.1954 I will appreciate your comments.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Ejector pin grinding/cut off machine? | Chuck Reamer | Moldmaking | 19 | 10-15-2011 05:58 AM |
| In 'X Axis' Having vibration | dspjbp | Machine Problems, Solutions , Wireless DNC, serial port | 0 | 12-20-2007 12:27 PM |
| cause of Z axis vibration | dahui | Shopmaster/Shoptask | 5 | 08-16-2007 09:39 PM |
| X axis vibration | harvard5 | Servo Motors and Drives | 1 | 08-14-2007 08:07 PM |
| Vibration in X axis of lathe | sab | General Metal Working Machines | 2 | 05-19-2006 02:57 PM |
| | |
Linear Mode
