| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Machining Centers Discuss wood cutting CNC machining centers, and Point-to-Point machines here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-05-2008, 06:55 PM
| |||
| |||
Hi all, We have a Deckel Maho DMC-70V with a Franze Kessler spindle motor type: 100.AL.4.FOS whose bearings are on the way out. We are considering rebuilding it ourselves (cost of changeover from DMG is horrendous). We therefore need to get specs for this motor such as preloading values etc. Drawings of the motor would be marvelous if anyone has them. Any other advice would be greatly appreciated. Yes we know these are complex beasties but have some experience in the area but not with Kessler motors. Any advice from the collected wisdom out there would be very welcome. Thanks in advance Adrenal  |
|
#3
03-31-2010, 10:40 AM
| |||
| |||
Hello Adrenal, Do you still need the spindle repaired? Contact: Precision Spindle & Accessories Inc. www.precisionspindleinc.com tel. 519 671 3911 haviland@precisionspindleinc.com fax. 519 652 5994 |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| spindle motor | eviljinks | DIY-CNC Router Table Machines | 2 | 10-20-2007 09:36 AM |
| Spindle Motor | Bobbyr70 | Phase Converters and VFD | 3 | 10-09-2007 09:43 AM |
| Servo motor used as spindle motor? | fatal-exception | General Metal Working Machines | 6 | 09-14-2007 02:55 AM |
| more rpms for spindle motor and spindle | bob1112 | Mechanical Calculations/Engineering Design | 33 | 02-10-2007 01:01 PM |
| Spindle motor | TommyB | DIY-CNC Router Table Machines | 1 | 12-08-2004 10:11 AM |
| | |
Linear Mode
