| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Machining Centers Discuss wood cutting CNC machining centers, and Point-to-Point machines here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-11-2007, 09:47 PM
| |||
| |||
Hi, and thanks for any help in advance. I have a VF-3 2001 model, and ever since I've had it it runs a lot of air thru it. It runs air thru it as soon as the spindle starts, or a tool change, and it blows until about 30 seconds after the spindle shuts down. I am wondering if I can go in and either change a parameter, or do something machanical to minimize how much air it is using. First off, I guess I should ask if the constant running of the air is needed for this machine. Its really annoying, as the air compressor is almost always running. Thanks again Jimmy  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HAAS SL20 and HAAS VF2 ProE Posts? | CNC_student | Post Processor Files | 5 | 07-10-2008 02:46 PM |
| 93 Haas VF2 | Rcky123 | Haas Mills | 1 | 10-09-2007 02:10 PM |
| Haas HSM | Mosher | Haas Mills | 20 | 08-11-2007 12:46 PM |
| new toy put out by haas | axis | Commercial CNC Wood Routers | 1 | 04-17-2007 09:45 AM |
| Haas 2 haas serial comunication? | CNCgr | Haas Mills | 3 | 12-22-2006 12:07 PM |
| | |
Linear Mode
