| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Machining Centers Discuss wood cutting CNC machining centers, and Point-to-Point machines here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-03-2007, 09:37 AM
| |||
| |||
Hello guys can someone help me on this I have a Milling Machine Leadwell MCV550S with a M3 (fanuc control) by mistake I turn it off to change the batteries and I lost all the parameters I put it back and so far everything works except for the tool changer; When I call it grab the tool and the carrussel start turning for the next tool and never stop keep turning and turning so I was wondering if theres something with the parameters or wath? Please advice.  |
|
#2
10-25-2007, 01:42 AM
| |||
| |||
| HI, Not sure if you have managed to sort out the problem, i had a similar one and managed to get the parameters, it's diagnostic parameter #160 for a 12 station carrousel the setting is 00010010 and then parameter #168 must be 00000001 when tool 1 is facing the spindle. Hope it helps |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tool changes without a changer on TM-1 | mpstech | Haas Mills | 18 | 01-11-2007 01:20 AM |
| Rapid Tool Changer | heilcnc | Benchtop Machines | 1 | 10-28-2006 05:00 PM |
| tool changer | motomitch1 | Fanuc | 6 | 08-10-2006 03:02 AM |
| Tool Changer | Moondog | Mach Software (ArtSoft software) | 4 | 05-21-2006 02:34 PM |
| Tool Changer - How? | creative_mind | CNCzone Club House | 17 | 08-30-2003 10:01 PM |
| | |
Help with a Tool Changer Parameter 
Linear Mode
