| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Machining Centers Discuss wood cutting CNC machining centers, and Point-to-Point machines here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-12-2007, 07:50 PM
| |||
| |||
| 1994 haas vf 2 I just got this thing and need to get it running. I need sugestions on cad cam software. Cheap or free would be even better. I just need it to run a couple parts to get funds back up and upgrade software.    |
|
#2
01-12-2007, 09:01 PM
| ||||
| ||||
| I have mastercam at work but I just punch in the code at the controller probably atleast 90% of the time, Are the parts you want to run very complicated? Do you have drawings or dxf files? |
|
#3
01-12-2007, 10:44 PM
| |||
| |||
| I have master cam at work also. The total program is 17,000 lines so it is not simple,but really not that advanced. It is an exterior wall with interior square tower and outside walls are radised from top of wall on corners to center. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
