Ikegai TV-4 machine M06 not working.

[Ashu]

On my Ikegai TV4 maching center M06 is not working in MDI or Auto mode. In jog mode all the ATC operations are working independently. But when command is given in Auto or MDI it doesn't work. IS there any perticular program where ATC tool change position are mentioned. means when the M06 is given automatically that programme is called automatically so that sp.orientation, x,Y,Z axis positions are taken & tool change happens. I have not got that program o9000 or so in directory. Anybody is having this program .pls help. Machine is having fanuc 0mb control.

[dertsap]

did you delete the sub routine from the memory ?

[Ashu]

No I have not deleted any thing. This machine i bought it 2 nd hand. and landed in problem. I want to know is there any micro program for ATC movement? If yes then where can I get that?

[tobyaxis]

Post the Program so we can have a look. In the mean time check your manual to see if there is a parameter setting that needs to be changed.

[dertsap]

your tool change postion could be different than z home position , rapid down the z and in mdi use a g30 instead of g28

[Ashu]

I said I have not found any program suitable which is related to ATC movement. This means I checked for program with 9000 or 8000 series. There is no prgram whoes no starts from 9000 or 8000. Pls let know is there any other method to check?
I checked in the given manual also. It is not mentioned any where. pl help.

[Ashu]

Dear dertsap,

What about x &Y axis position? Partactically I feel that all axis position is required for ATC tool change position.

[tobyaxis]

Originally Posted by Ashu I said I have not found any program suitable which is related to ATC movement. This means I checked for program with 9000 or 8000 series. There is no prgram whoes no starts from 9000 or 8000. Pls let know is there any other method to check? I checked in the given manual also. It is not mentioned any where. pl help.

Try what Dertsap said. use G30 in place of G28.

MOVE THE Z AXIS DOWN AWAY FROM HOME

(MDI MODE)

G0G17G40G49G80G90M5
G91G30Z0M9
T1
M6

[tobyaxis]

Originally Posted by Ashu Dear dertsap, What about x &Y axis position? Partactically I feel that all axis position is required for ATC tool change position.

Try that too because some Mills require Y and Z axis to be home before ATC can take place

[Ashu]

Ok I will try that.
But do know anybody who is having IKEgai TV-4 machine with fanuc 0MB control. so that I can contact him. or how to contact ikegai service personal ? there no representation here.

[tobyaxis]

Try this quick program in MDI after moving all axis away from home positions

G0G17G40G49G80G90
G91G30Y0Z0M19
T1
M6

Try this one too

G0G17G40G49G80G90
G91G28Y0Z0M19
T1
M6

[tobyaxis]

Originally Posted by Ashu Ok I will try that. But do know anybody who is having IKEgai TV-4 machine with fanuc 0MB control. so that I can contact him. or how to contact ikegai service personal ? there no representation here.

These guys can help you.

http://www.fanucamerica.com/fa_home/home.asp