Ikegai TV-4 machine M06 not working.

[dertsap]

lots of fanuc controls don t like to have the tool nuber and the m6 on the same line , can this be the problem

[tobyaxis]

Originally Posted by dertsap lots of fanuc controls don t like to have the tool nuber and the m6 on the same line , can this be the problem

Only the old ones 1987 and earlier Dertsap. The new ones take it in one line.

Ooops! correction to that statement; the Fanuc 0 series 1990 and earlier won't take T1M6 in on line. It really all depends on the machine builder. I don't even know if Ikegai is still around. I'll do a quick search

[dertsap]

we have a couple newer ones and they don t seem to like it , may be a machine manufacturer call , they all seem to have their own idea of how to setup those controllers

[tobyaxis]

Originally Posted by Ashu Ok I will try that. But do know anybody who is having IKEgai TV-4 machine with fanuc 0MB control. so that I can contact him. or how to contact ikegai service personal ? there no representation here.

This Ikegai website has a forum

http://www.ikegai.com/

[tobyaxis]

Your machine Ikegai TV-4 Fanuc 0M 1991, Right?

Do a search on Google for your machine like This "Ikegai TV-4 Fanuc 0M 1991"

[Ashu]

Thank you both for your help extended. Google search i have already done . yet i have not got any proper information.

Actually on machine when only e.g.m6 t1 command is given that time nothing happens. no movement nothing. no alarm. Its surprising.

[tobyaxis]

Originally Posted by tobyaxis Try this quick program in MDI after moving all axis away from home positions G0G17G40G49G80G90 G91G30Y0Z0M19 T1 M6 Try this one too G0G17G40G49G80G90 G91G28Y0Z0M19 T1 M6

Did you try these?

[Ashu]

I have not tried yet because My m/c shop is far away from here. I in office now. I will let you know.

[CNC Mendez]

Hi,
Do you have the Circuit Diagram?
if you have it, is really easy see where is the problem, search the address M06 Fin or Tool Change.

Good luck

[dertsap]

i think he got it

[tobyaxis]

Originally Posted by dertsap i think he got it

Lets Hope I can't think of anything worse than not being able to make parts. Then again there is only one other thing

[QUOCPLC]

DEAR TO WHOM MY CONCERN
I HAVE IKEGAI ,TV4
M6 NO WORKING TOO
PLS HELPS ME TO FIX THAT
THANK YOU
QUOC PHAN 714 349 6954
QUOCPHAN2003@YAHOO.COM