BIESSE ROVER 18 - pc CNC Program edit

[CNCworldER]

Hi,


I would like to know how can I view the BIESSE ROVER 18 cnc prorgam properly.

I did copy the program to floppy from the rover 18 C: drive
I did copy the program to my PC on xp OS through
CAD/CAM system rel.2.86 - C.N.I WMMENUUT REL.9.0 .
I did it to 3 files :
when I open them with notepad I can see only ....

File 1 :



 †††††††††㌀㄀]ĩ0蘀㄁çƆ崱洀㄂ˊ㄰嘱ㄬㄬ〱††Ⱐ㈲㔮††ㄬ″†Ⱐ㔳†Ⱐⰲ†Ⱐ†††Ⱐ†††Ⱐ†ਬⱖⰱ㐸†††㈬‸††Ⱐ㌱††ㄬ‰†ㄬ㈬†㔬′††‬†††‬Ⱐ嘊㐬㠬‴††Ⱐ㠲†††ㄬ″†Ⱐ〱†Ⱐⰱ′Ⱐ㈵††Ⱐ†††Ⱐ†ਬⱖⰴㄱ‰††㈬⸲‵†Ⱐ㌱††㌬‵†㈬‬†‬†††‬†††‬Ⱐ䰊塐㤽㔹†††††††††††ਠ偌㵙㤳′†††††††††††䰊婐ㄽ‵†††††††††††ਠㅎ‰㡘⸴〰夠㠲〮‰剐㵆㌱〮‰㵌㥇‹㉔上〲堠㌱⸶〰夠㠲〮‰剐㵆㌱〮‰㵌㥇‹㉔上〳堠ㄱ⸰〰夠㈲㔮‰剐㵆㌱〮‰㵌㥇‸ㅔਰ㑎‰㡘㤵〮‰㉙⸸〰倠䙒ㄽ⸳〰䰠䜽㤹吠ਹ㕎‰㡘㔸〮‰㉙⸲〵倠䙒ㄽ⸳〰䰠䜽㠹吠〱上〶堠ㄹ⸱〰夠㠲〮‰剐㵆㌱〮‰㵌㥇‹㥔┊上〱䜠ㄷ䰠㵘㤹‵奌㌽㈹䰠㵚㔱䠠ㅃ娠倽䭒††††††††††††††††††ਠ㉎‰㵙剐⁋㵚剐ੋਥ㥇‹†††䜠㠹††††㨪⨚ᨺ‰㝘㈹〮‰㉙⸷〰倠䙒ㄽ⸳〰




File 2:





p
3 1] £
0 1]
1M ]1 ×011V,1,725 ,22.5 ,13 ,35 ,2, , , , ,
V,1,699 ,28 ,13 ,10 ,1,2 ,52 , , ,
V,4,110 ,22.5 ,13 ,35 ,2, , , , ,
V,1,110 ,22.5 ,13 ,35 ,2, , , , ,
V,1,84 ,28 ,13 ,10 ,1,2 ,52 , , ,
V,4,84 ,28 ,13 ,10 ,1,2 ,52 , , ,
LPX=1450
LPY=390
LPZ=15
N10 X84.00 Y28.00 PRF=13.00 L=G99 T2
N20 X136.00 Y28.00 PRF=13.00 L=G99 T2
N30 X110.00 Y22.50 PRF=13.00 L=G98 T10
N40 X699.00 Y28.00 PRF=13.00 L=G99 T9
N50 X725.00 Y22.50 PRF=13.00 L=G98 T10
N60 X751.00 Y28.00 PRF=13.00 L=G99 T9
N70 X1314.00 Y28.00 PRF=13.00 L=G99 T9
N80 X1340.00 Y22.50 PRF=13.00 L=G98 T10
N90 X1366.00 Y28.00 PRF=13.00 L=G99 T9
%
N10 G71 LX=1450 LY=390 LZ=15 HC1 Z=PRK
%
G99 G98 *:G98 *:


File 3:


 †††††††††㌁㄀]ȝ0稀㄂ǖɺ䴱倀㄄ҝ㄰嘱ㄬㄬ〱††Ⱐ㈲㔮††ㄬ″†Ⱐ㔳†Ⱐⰲ†Ⱐ†††Ⱐ†††Ⱐ†ਬⱖⰴㄱ‰††㈬⸲‵†Ⱐ㌱††㌬‵†㈬‬†‬†††‬†††‬Ⱐ嘊㐬㠬㜱††Ⱐ㈲㔮††ㄬ″†Ⱐ㔳†Ⱐⰲ†Ⱐ†††Ⱐ†††Ⱐ†ਬⱖⰱㄸ‷††㈬⸲‵†Ⱐ㌱††㌬‵†㈬‬†‬†††‬†††‬Ⱐ嘊ㄬ㠬‴††Ⱐ㠲†††ㄬ″†Ⱐ〱†Ⱐⰱ′Ⱐ㈵††Ⱐ†††Ⱐ†ਬⱖⰴ㐸†††㈬‸††Ⱐ㌱††ㄬ‰†ㄬ㈬†㔬′††‬†††‬Ⱐ嘊㐬㜬ㄹ††Ⱐ㠲†††ㄬ″†Ⱐ〱†Ⱐⰱ′Ⱐ㈵††Ⱐ†††Ⱐ†ਬⱖⰱ㤷‱††㈬‸††Ⱐ㌱††ㄬ‰†ㄬ㈬†㔬′††‬†††‬Ⱐ䰊塐㈽㠲‰††††††††††ਠ偌㵙㤳‰†††††††††††䰊婐ㄽ‵†††††††††††ਠㅎ‰㡘⸴〰夠㠲〮‰剐㵆㌱〮‰㵌㥇‹㉔上〲堠㌱⸶〰夠㠲〮‰剐㵆㌱〮‰㵌㥇‹㉔上〳堠ㄱ⸰〰夠㈲㔮‰剐㵆㌱〮‰㵌㥇‸ㅔਰ㑎‰㝘ㄹ〮‰㉙⸸〰倠䙒ㄽ⸳〰䰠䜽㤹吠ਹ㕎‰㡘㜱〮‰㉙⸲〵倠䙒ㄽ⸳〰䰠䜽㠹吠〱上〶堠㐸⸳〰夠㠲〮‰剐㵆㌱〮‰㵌㥇‹㥔上〷堠㐱㜳〮‰㉙⸸〰倠䙒ㄽ⸳〰䰠䜽㤹吠ਹ㡎‰ㅘ㘴⸳〰夠㈲㔮‰剐㵆㌱〮‰㵌㥇‸ㅔਰ㥎‰ㅘ㠴⸹〰夠㠲〮‰剐㵆㌱〮‰㵌㥇‹㥔上〱‰㉘㐱⸴〰夠㠲〮‰剐㵆㌱〮‰㵌㥇‹㥔上ㄱ‰㉘㜱⸰〰夠㈲㔮‰剐㵆㌱〮‰㵌㥇‸ㅔਰㅎ〲堠ㄲ㘹〮‰㉙⸸〰倠䙒ㄽ⸳〰䰠䜽㤹吠ਹਥㅎ‰㝇‱塌㈽㠲‰奌㌽〹䰠㵚㔱䠠ㅃ娠倽䭒††††††††††††††††††┊䜊㤹††††㥇‸†††⨠ᨺ††Ⱐ㈲㔮††ㄬ″†Ⱐ㔳†Ⱐⰲ†Ⱐ†††Ⱐ†††Ⱐ†ਬⱖⰱㄸ‷††㈬⸲‵†




3 of them work fine on the machine .



The question ....

How can I View and edit the CNC program , properly , like in the he original form?
The form that was built on the BIESSE ROVER 18 NC481 PROGRAM.

Where I can find the full version of the

CAD/CAM system rel.2.86 - C.N.I WMMENUUT REL.9.0 - Pc program.
with all the module ( like Programs/sub-programs/cycles editor)
??


Thanks

Erez

[smorelock]

You can get a copy from biesse or contact CNI infomatica in Itlay http://www.cniinformatica.it/eng/default.aspx. This software needs a lpt1 dongle and only works in windows 98. They have a upgrade to windows xp
But it cost a lot more.

[blackvision]

There's another software: RTCAM that should fit.