Problem with Wadkin UX with Bosh CC100

[jaydub]

Hi can anyone give me some advice? - My problem is that the machine I am using (Wadkin UX with Bosh CC100 control) has a problem with the drill heads. The two heads have recently had some work done to them and I ran a drill check program that we have. This uses both heads and the holes drilled can be measured from a centre to check for deviations. The guy who used to do this would then alter something in one of the control programmes to compensate for the deviation in measurements. The problem is that the guy did not let anynone know what he did and he has now left the company and can't be contacted. Has anyone had to do this and if so would you be able to tell me what I should be looking at.

[sobotta]

Hello jaydub,
We had a wadkin CC2000 with a CC100 controller. We are working with this machine and I know a lot of the programming the Gcode and how to transfer programs. I did not understand your problem and it may be helpfull to see the used drawing or the GCode. In the moment I have myself a problem with this machine because the RAM memory is empty because no battery power. Here yu will see the machine working.
http://www.youtube.com/watch?v=gUFeC87RyD8]Holzfräsen - YouTube
Many greetings