Hi Guys.. I'm Andy
currently, i have a problem with the spindle on my Leblond makino Fanuc 0M
when i dialed the Spindle .. it got 0.06 tolerance
its really a big tolerance for a spindle..
i dont know what the previous owner did to the machine...

what's your opinion 'bout this?
should i change the Bearings in the spindle? or.. replace with a new spindle?

P.S ... the problem is... This is 1987 production CNC machining center
i dont know whether there is still a replaceable new Spindle on stock or not...

thnks guys