Help with Biesse Controller

[nztomcat]

Hello

heres the problem i have

I've currently got a biesse rover 336 that i have just fitted with a 5hp hsd spindle that i took off a rover 322. .

What I'm wanting to know is does anyone know how to assign an output on one of the existing modules int he machine head to a tool in the plc side of things any help would be appreciated.

Thanks

[battwell]

it can be done by assigning plc bits.
thats in the manual (480 controller)
if you dont have a manual i may have a pdf otherwise il take a photo of the page.

is this an extra head? does the machine already have the pneumatic block etc connected?

[nztomcat]

Hello thanks for the reply somehow I thought you would be the one that replies

sorry I dont have a manual for it this is an extra head to a degree I've take an existing one off and fitted the saw one where the "C"router normally is so it goes up and down.

I dont have a copy of the manual so anything you can share would be highly appreciated

[battwell]

how did you get on?
my 335 model arrived. just started the conversion on it.
should be finished this afternoon :-)

[battwell]

by the way. mines missing 1 of the 3 spindles so im looking for a saw unit.