Need help CNC4PC Non-Contact Height Sensor for Plasma

Results 1 to 2 of 2

Thread: Need help CNC4PC Non-Contact Height Sensor for Plasma

  1. #1
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Need help CNC4PC Non-Contact Height Sensor for Plasma

    Need help wiring CNC4PC Non-Contact Height Sensor for Plasma wiring to Hypertherm Powermax 45 XP through Mach 3
    Using CNC4PC C23 - Dual Port Multifunction CNC Board with smooth stepper.
    Any Wiring diagrams would be awesome.

    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2004
    Location
    United States
    Posts
    307
    Downloads
    0
    Uploads
    0

    Default Re: Need help CNC4PC Non-Contact Height Sensor for Plasma

    Please check for the wiring diagram and instructions link for the product under the product page in our website:

    https://cnc4pc.com/non-contact-heigh...el-cutter.html

    The sensor signals go to available input pins in the C23 and one of the relay on the C23 can be used to fire the torch.

    If you need further assistance, you are welcome to open a support ticket in our website.

    Arturo Duncan
    http://cnc4pc.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help CNC4PC Non-Contact Height Sensor for Plasma

Need help CNC4PC Non-Contact Height Sensor for Plasma