C62 setup question

Results 1 to 6 of 6

Thread: C62 setup question

  1. #1
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default C62 setup question

    Bought new c62 recently - getting to setup and all the wonderful manuals error 404.

    Anyhow, setting up c62 board with KL2283 drives. Possible to identify which wires from rj45 out goes to dir- / dir + / pul - / pul +? Thanks

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: C62 setup question

    Contact Arturo, and let him know that his website is messed up, and you need a manual.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Re: C62 setup question

    Finallly got in touch with them via their site - they helped and they will.



  4. #4
    Member
    Join Date
    Oct 2004
    Location
    United States
    Posts
    307
    Downloads
    0
    Uploads
    0

    Default Re: C62 setup question

    The idea is that you connect that driver using the C34KL:

    https://cnc4pc.com/c34kl-driver-to-r...s-drivers.html

    If you do not have it, you could connect it using the pinout on page 15 of the manual of the C62:

    http://cnc4pc.com/Tech_Docs/C62R5_USER_MANUAL.pdf

    Connect PUL- and DIR- to GND and STEP and DIR pulsed on the C62 to PUL+ and DIR+.

    I am sorry for the manuals folder in our website, it is OK now.

    Arturo Duncan
    Welcome to CNC4PC



  5. #5
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Re: C62 setup question

    The idea is that you connect that driver using the C34KL:

    Wish I had known that existed before now. Dang.


    Thanks for response - cnc4pc support has always been helpful. Glad site / manuals are back up

    Edit - just ordered 3 of your adapters. should make install look nice as well as perform. Great idea. Consider making adapter like that for common VFDs?

    Last edited by SchortBus; 08-09-2017 at 01:42 PM.


  6. #6
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Re: C62 setup question

    As FYI - received adapters today, the C34KL does not fit the KL2283 driver. Pins are too wide, does not match the inputs. Figure it would be same for the 1180 model.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

C62 setup question

C62 setup question