Please check our website for the VFD paramethers:
https://cnc4pc.com/2-2kw-vfd-motor-s...oller-vfd.html
Arturo Duncan
Welcome to CNC4PC
I have a C11GS and a Huanyang 4kw inverter. I've done the wiring by following the PDF below. However, some of the VFD parameters are very confusing. There are many posts on the internet but none actually helped me.
When I toggle the spindle in Mach3 I can hear the relay on the C11GS is ticking so Mach3 settings should be OK.
By the way, the jumper on the inverter is on the right side.
What are the parameters and values in correct order I need to set?
http://cnc4pc.com/Tech_Docs/C11GS%20and%20Huanyang.pdf
Thanks in advance.
The motor:
Similar Threads:
- Need Help!- HUANYANG INVERTER AND SPINDLE SET UP
- Huanyang Inverter questions
- Need Help!- huanyang inverter HY020223B 3hp 2.2kw
- Huanyang inverter PD settings
- Need Help!- Huanyang inverter
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby
Please check our website for the VFD paramethers:
https://cnc4pc.com/2-2kw-vfd-motor-s...oller-vfd.html
Arturo Duncan
Welcome to CNC4PC