Suat,
Here is the wiring diagram you need: http://cnc4pc.com/Tech_Docs/C11GSR2%20and%20KB120.pdf
Arturo Duncan
http://cnc4pc.com
I have the C11GS from cnc4pc and a PWM drive for the lathe spindle motor. The PWM drive simply needs an analog signal from a pot (0-10v).
Any help would be appreciated.
Thanks,
Suat
Similar Threads:
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby
Suat,
Here is the wiring diagram you need: http://cnc4pc.com/Tech_Docs/C11GSR2%20and%20KB120.pdf
Arturo Duncan
http://cnc4pc.com
That's great Arturo. Thanks.
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby