Need Help! Mach 3 WITH ESS C62 BOB AND DYN4

Results 1 to 13 of 13

Thread: Mach 3 WITH ESS C62 BOB AND DYN4

  1. #1
    Registered
    Join Date
    Jun 2016
    Location
    Canada
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Mach 3 WITH ESS C62 BOB AND DYN4

    I have the Estop to work on mach3 cant get DYN4 SERVO TO WORK
    I install a jumper wire on the C62 ESTOP PORT
    24 VOLT TO POWER THE C62 BOB AND THE ESS
    I AM NOT SURE FOR THE CONFIGURATION JUMPER TERMINALS ON THE C62 BOB
    I AM NOT SURE FOR THE PORTS AND PIN IN MACH3


    ANY HELP WOULD BE APPRECIATES

    THANKS

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2016
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    any luck figuring this out? im in the same boat with a C62, uccnc 300 Ethernet , and dyna 4 drives and motors...documentation almost non existent.



  3. #3
    Registered
    Join Date
    Jun 2016
    Location
    Canada
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    it working with the help of cnc4pc

    what is your problem ?
    mach3 or mach4
    i could send you some picture of my set up



  4. #4
    Registered
    Join Date
    Oct 2016
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    im trying to set up uccnc



  5. #5
    Registered
    Join Date
    Jun 2016
    Location
    Canada
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    send me your e mail it wont let me load the pic on the forum

    Attached Thumbnails Attached Thumbnails Mach 3 WITH ESS C62 BOB AND DYN4-imgp2744-jpg  


  6. #6
    Registered
    Join Date
    Jun 2016
    Location
    Canada
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    Mach 3 WITH ESS C62 BOB AND DYN4-imgp2745-jpg

    - - - Updated - - -

    Mach 3 WITH ESS C62 BOB AND DYN4-imgp2746-jpg

    - - - Updated - - -

    Mach 3 WITH ESS C62 BOB AND DYN4-imgp2747-jpg

    - - - Updated - - -

    Mach 3 WITH ESS C62 BOB AND DYN4-imgp2748-jpg

    - - - Updated - - -

    Mach 3 WITH ESS C62 BOB AND DYN4-imgp2749-jpg



  7. #7
    Registered
    Join Date
    Jun 2016
    Location
    Canada
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    Mach 3 WITH ESS C62 BOB AND DYN4-imgp2750-jpg

    - - - Updated - - -

    Mach 3 WITH ESS C62 BOB AND DYN4-imgp2751-jpg

    - - - Updated - - -

    Mach 3 WITH ESS C62 BOB AND DYN4-imgp2752-jpg



  8. #8
    Registered
    Join Date
    Jun 2016
    Location
    Canada
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    Mach 3 WITH ESS C62 BOB AND DYN4-image003-png

    - - - Updated - - -

    Mach 3 WITH ESS C62 BOB AND DYN4-image002-jpg



  9. #9
    Member
    Join Date
    Apr 2008
    Location
    United States
    Posts
    203
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    you should only have 5v to the c62 and ess.



  10. #10
    Registered
    Join Date
    Oct 2016
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    thanks for your replies and pictures. cnc4pc sending me a few things to get me going.... im also using uccnc so my operation system is different.



  11. #11
    Registered
    Join Date
    Oct 2016
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    are you happy with your set up? any issues?



  12. #12
    Registered
    Join Date
    Jun 2016
    Location
    Canada
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    VERY HAPPY WITH THE SET UP



  13. #13
    Registered
    Join Date
    Oct 2016
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 WITH ESS C62 BOB AND DYN4

    What part of Canada you from? I'm 15 minutes from Cornwall, Ontario.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mach 3 WITH ESS C62 BOB AND DYN4

Mach 3 WITH ESS C62 BOB AND DYN4