That's one smooth operating machine! Thanks for the great video CarveOne!
Here is the link to the Fajita Tray video. Hope it is worth the wait. A surprise ending for you too.
CarveOne
http://www.carveonecncwoodcraft.com
That's one smooth operating machine! Thanks for the great video CarveOne!
Thanks Donny,
It has a pleasure building it multiple times to get it looking and working like this. This has been an unintended "start big and go bigger" exercise.
CarveOne
http://www.carveonecncwoodcraft.com
I mentioned in earlier posts that I was going to take a break from the CNC projects for a while and now have the chance to do so. Looks like I'll be working most days at the LSA America airplane factory for 1-1/2 to 3 months machining parts until they can hire a full time machinist. They have 15 airplanes to build with a renewable contract for more. They called yesterday morning.
I helped them when they first started the business. Might be fun. They have a 15x60 lathe and a large knee mill now. It's a temporary job that is expected to last 45 to 90 days. I needed a break from the home project work anyway. The extra income will undoubtedly spawn some new CNC home projects.
CarveOne
http://www.carveonecncwoodcraft.com
What happens if you are better than the other machinist that comes? They might make you an offer you cannot refuse.
Jason
Sounds like fun.
I'd like to make some money for new projects too.
Cheers,
Walking is highly over-rated
From the description of him, it sounds like he is a real machinist by trade, not a self taught hobbyist like me. He's someone that is used to holding tight tolerances for production work while I'm someone that just makes usable parts for my own needs. I have the job offer because I did similar work for them when they first set up business. I was recommended to them by an electrician friend that did some wiring upgrades for the old building.they leased. They have interviewed a few applicants and found that the applicants were not as well trained as they claimed to be. Well, getting familiar with any complicated machine that is new to me isn't going to go fast with me either. The lathe I used today is a 16 x 60 and has some features that my 12x36 doesn't have. Their lathe has X and Y digital readout, but no tail stock digital readout. I needed that for the parts I made today. Can't complain though. My lathe has no digital readouts at all. I don't normally work with metric measurements but that's what all of the parts on these airplanes use. I didn't find it to be any problem though. Some of the text on the part drawing was a little hard to read if you can't read Czech Republic standard notation. That's where the airplane was originally designed and built.
I don't think this small company can make an offer that good.
CarveOne
http://www.carveonecncwoodcraft.com
CarveOne
http://www.carveonecncwoodcraft.com
We added another layer of foam padding on the floor where I stand today and I picked up some gel insoles for the work shoes on the way home. Those should help a lot.
I don't think they would go for a lounge chair, Dropcam with big screen monitor, and remote control for the lathe. I wish my Harbor Freight 12x36 lathe ran as smooth as this one..It's a GMC model GML-1660GD.
CarveOne
http://www.carveonecncwoodcraft.com
Hi C1, long time, no see!
How goes building Allegros? Saw them at Oshkosh and thought of you, wondered which part you made - probably engine parts, no?
Made a "wedding box" for a family member and could have used some advice - despite my best efforts at dust control and wipe on techniques, I am still plagued by dust in my clear finishes. Its not horrible, but I find it irritating. Still want to use a gel stain, but I am looking for something less problematic than poly. Tried Danish Oil over the gel, but it didn't work so well even if I let the gel dry for 2 weeks. Any ideas?
Anyway, hope the grind of standing hasn't been too bad for you,
"72.6 per cent of all statistics are made up on the spot." - Steven Wright
PS You going to the Woodworking in America show?
"72.6 per cent of all statistics are made up on the spot." - Steven Wright