You want a 45° inside angle on your panels?
The reason you can't find one, is that the bit would need to be 3-3/4" diameter to miterfold 3/4" thick material.
Hi Everyone,
I have scoured the internet looking for a 135 degree miter fold bit (for making 45 degree panel joints) and I'm coming up empty. Does anyone know of a supplier who makes one? The bits I'm referring to are like these:
https://www.toolstoday.com/p-5671-cn...rt-knives.aspx
They have 130 and 140, but not 135. Any help is appreciated!
-Greg
Similar Threads:
You want a 45° inside angle on your panels?
The reason you can't find one, is that the bit would need to be 3-3/4" diameter to miterfold 3/4" thick material.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Would these work? 135° are at the bottom.
https://www.toolstoday.com/p-6193.as...ial-acm-panels
Mr Jim thanks for the link ,I have used that Alubond type product there is an awful lot you can do with it cuts beautifully .
My Pleasure.