im really new to this I built my self a cnc no problem waiting on motor know
not hard to make
my problem is beside's my spelling I have no I deal on bit's
what bit's do what what kind of bit do I need and what well be best for what I making
im a cgi editor I also clay sculpt thin mold thin/cast thim
I wonted to cnc mold's as a cost would be less for me paying 120$ for 8 pound's of mold cost alote
what I make is 3d modal's say a face just to give you a ideal here
I also like to do 2d/3d layout's from artcam
im runing Maya rhino artcam making the modal and runing a sim in rhino no problem but not knowing what bit's do what or what I need to cut a 3d modal out of wood plastic and alum is bugging me
wood and plastic is what I have I make plastic here so making plastic block for cut's no problem
wood is cheep 2 x 4 and 2 x 8 there just for testing at the moment
at this point I have no router bit's for my cnc
if there is a site that has something that can help it be great
again sorry for the spelling
Similar Threads:
time do's not matter stoping it do's if you can stop time for one hour thin that hour would be forever