Vaccuum Heat Treated Inconel Longet Than 3 Foot

[jreynolds5]

The material spec is Inco 718 Material - AMS-5662 Heat Treated to AMS-5663 and we cannot find anyone that heat treats it longer than 3 foot here in Michigan. Boston Centerless can get it but I don't know their supplier and we hwant to havemore than 1 option for material. And I feel we can get it cheaper if we buy the stock and have a local grind house grind it. Any help is greatly appreciated.

Similar Threads:

• Turning 4140 heat treated to R60
• Passivating Heat Treated Stainless Steel
• Tapping 17-4 Heat treated stainless steel
• Heat treated 17-4 PH snapping taps
• I need to cut a 20 foot sheet on a 10 foot table. How? Indexing???

[jptech]

Hi jreynolds5, We use Solar Atmospheres of Western Pa for all of our heat treating. They have vacuum furnaces, and handle long lengths. They do great work, and we've been using them for 11+ years. I think they can probably help you out. We are located about an hour away from them in Kent, Ohio, and they do pick up and delivery. I'm not sure of their full area.

Mike Johnson
mikej@solarwpa.com
866-982-0660 ext:2223
30 Industrial Rd
Hermitage, Pa 16148

I hope this helps you out! --------------- John

[jreynolds5]

Thank yo I will give them a shot.

[fighterjet1995]

Hi jreynolds5, We use Solar Atmospheres of Western Pa for all of our heat treating. They have vacuum furnaces, and handle long lengths. They do great work, and we've been using them for 11+ years. I think they can probably help you out. We are located about an hour away from them in Kent, Ohio, and they do pick up and delivery. I'm not sure of their full area.

Mike Johnson
mikej@solarwpa.com
866-982-0660 ext:2223
30 Industrial Rd
Hermitage, Pa 16148

I hope this helps you out! --------------- John

Fighter Jet Metals also stocks AMS 5662 and can take care of heat treating to AMS 5663 through NADCAP approved suppliers:
https://fighterjetmetals.com/2020/11/17/ams-5662/
https://fighterjetmetals.com/2020/11/17/ams-5663/