Cav Barfeeder Problem



Results 1 to 3 of 3

Thread: Cav Barfeeder Problem

  1. #1
    Registered
    Join Date
    Sep 2014
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Cav Barfeeder Problem

    Good Morning
    I have cav 20- l2 on L20 i need to slow down the speed of the pusher retract. If somebody
    know what is the parameter the control that?

    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Jul 2008
    Location
    USA
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: Cav Barfeeder Problem

    cncswiss, Have you checked out the settings through the Prep page? I can't remember if it's in there or not. I know it has pusher torque, so you may have speed in there as well. I'll take a look tomorrow. -----------John



  3. #3
    Registered
    Join Date
    Sep 2014
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by jptech View Post
    cncswiss, Have you checked out the settings through the Prep page? I can't remember if it's in there or not. I know it has pusher torque, so you may have speed in there as well. I'll take a look tomorrow. -----------John
    Thanks
    I found it the parameter is in maintenance page



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cav Barfeeder Problem

Cav Barfeeder Problem