3dprintforums logo



Results 1 to 2 of 2

Thread: star sv-32j I did a bad thing.....

  1. #1
    Registered
    Join Date
    May 2010
    Location
    usa
    Posts
    30
    Downloads
    0
    Uploads
    0

    star sv-32j I did a bad thing.....

    Just got the machine. I need parameters 1023,2020,2022,2023,2084, and 2085. main and subside. I discovered that you can change parameters in the maintenance page. I did not know this. There is a difference between setting and settings! I have no backup parameters.

    Later

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    45
    Downloads
    0
    Uploads
    0

    Parameters

    They are pretty serious parameters that you need

    As there are two controller suppied for the SR32J
    18iTB and the 32i B and depending on the serial number of the machine there also could be other changes.
    I suggest you get intouch with you local Star Agent
    As they either have a copy themselves or the factory will have a copy when the machine was shipped



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed