Citizen A32 Z70-0001 Zero position error

[smellyfeet]

Hi,

Does anyone have the procedure for clearing the error " Z70 - Abs posn ref pt set incomplete 0001 Z2 $2"


Thanks.

Similar Threads:

• Need Help!- Citizen L20 error codes 4 and 17
• EX 274 error on Citizen L20
• 0001 E-Stop or PLC Alarm Error
• Yaskawa Servopack error: A.D1. Motor Load Position Excess Error
• Citizen Start Position L520....L720

[g-code_junkie]

Hi,

Does anyone have the procedure for clearing the error " Z70 - Abs posn ref pt set incomplete 0001 Z2 $2"


Thanks.

reference z2

[g-code_junkie]

reference z2

You can find the information,in the operators manual,under zero return.

[smellyfeet]

Thanks G-Code junki but that was obviously the first thing I did.

The machine would not zero as per the manual so I phoned Citizen and the guy in the service dept told me it was the batteries, so I changed them, no difference, just compounded the confusion.

Asking around, Someone told me to turn it off again, then on again but before pressing the on button, press the off button first.

Perfect???

[g-code_junkie]

Thanks G-Code junki but that was obviously the first thing I did.

The machine would not zero as per the manual so I phoned Citizen and the guy in the service dept told me it was the batteries, so I changed them, no difference, just compounded the confusion.

Asking around, Someone told me to turn it off again, then on again but before pressing the on button, press the off button first.

Perfect???

When you tried to perform the zp-exe did you get any overtravel or other alarms?