Try Onsrud o-flute bits for acrylic: Search for "acrylic o-flute" | Item List | LMT Onsrud
Im looking to bore, 2d contour and pocket 1/4" cast acrylic. Also 2d contour some 1/8" aluminum. what are your go-to bits for these operations? Below an example of what i'm attempting.
Similar Threads:
Try Onsrud o-flute bits for acrylic: Search for "acrylic o-flute" | Item List | LMT Onsrud
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]
Yes, I use an Onsrud "O" flute for this. For boring, I just use regular drill bits.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thank you Andrew and Gerry. Trying to figure out upcut vs. downcut now.
Following to learn as well
Upcut.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I order some from precisebits and ebay seller drillman1, a fellow Texan.