Something I'm planning on doing with my machine is to slice the spoilboard with an 1/8" bit down the middle of the extra extrusion. That way I can remove the section closest to me by just loosening the bolts. The would allow work with projects requiring a lot of Z travel, as well as cutting things like dovetails by clamping them to the side of the extrusion.
.
I know these kits have some travel past the spoilboard in the -Y direction, but by removing the forward 1/3 of the spoilboard would open up alot more real estate.
.
So many projects, so little time . .
.
Can't wait to see the video, GigaWatt!!
.