Hi Harry,
Sorry for replying to you through this post but it was the only way I could send an attachment.
Thanks for your interest.
Look forward to hearing from you.
Kind Regards
Chris.
P.S. The file is a job sent from the machine to the PC.
Cheers
Hello,
My company produces a text editor with DNC for CNC controls. I have been asked for help in connecting an SCM Record1 with NUM 720 controller to a PC.
I cannot find any communication parameters, and there is no manual available.
Can anyone help?
Harry
Hi Harry,
Sorry for replying to you through this post but it was the only way I could send an attachment.
Thanks for your interest.
Look forward to hearing from you.
Kind Regards
Chris.
P.S. The file is a job sent from the machine to the PC.
Cheers
Hi Shaun/All
I appreciate this tread is rather old but I've just bought a SCM Record 1 and require an Alphacam post processor for the NUM 720, is that something you can still help with!?
Thanks
M
Hi all
Also just recently purchased a SCM Record 1 num 720 and be grateful for any manuals, posts or advice with this machine.
Also we can not work out were the c1m1 wire at the back goes, so any wiring diagram be most helpful....
Thanks for any help.....
wood-creations@hotmail.com
Have error message N3 axes at limit switch...
Does anyone know how to sort this? thanks
Hi all,
I recently bought a SCM Record 1. Can anyone help with drill codes m-codes for this machines. Small programs using drill function would be helpful. Manual for this machine would be helpful.
Regards,
Keith
futons@hotmail.com
Hi all!!
Im have just joined the forum.
We have got a second hand record 1 and have a parts manual and all the NUM 720 manuals if you still need them.
My email address is oskar@caro.pl
Thanks a lot in advance.
Regards Robin9999.
Hello evey bady
We recently bought a used scm record 220 (1999) as a second machine for 5-axis jobs and are also missing the manual. Would you mind to send me a manual as well and electica wiring to install
My e-mail is Sameeh.Yakoup@nsfegypt.com
Thanks a lot in advance
Hello everybody,
I also need a copy of num720 manuals in english.
My e-mail is scurtu.alin@yahoo.ro!
Hello
NUM 720 allows Drip Feeding (DNC) to CNC, from DNC rs232 connected to pc?
I need a copy of NUM 720 controller manual in english, if possible.
My e-mail: nnd_1@yahoo.com
Hello,
NUM 720 allows Drip Feeding (DNC) to CNC from PC?
Could i have a copy of NUM 720 controller manuals in english?
My email: nnd_1@yahoo.com
Thank you,
Can any body please me troubleshoot our 2nd hand scm record 125 with xilog plus software. Calibration cannot be completed. PLC54 UDFXR REFERENCE U. VFRKTXI alarm will come on the screen and cannot be reset. My company is also looking to buy operation manual and troubleshooting guide for this equipment. Ty
Hi, the error generally means fault of a motor. For further details you need to check your documents inside the machine. Also if you could provide the machine serial number.