Communication Info Needed
Hello,
My company produces a text editor with DNC for CNC controls. I have been asked for help in connecting an SCM Record1 with NUM 720 controller to a PC.
I cannot find any communication parameters, and there is no manual available.
Can anyone help?
SCM Record 1 - Post Processor
Hi Shaun/All
I appreciate this tread is rather old but I've just bought a SCM Record 1 and require an Alphacam post processor for the NUM 720, is that something you can still help with!?
Thanks
M
Re: SCM Record 1 manual, infos, downloads ?
Hello everybody,
I also need a copy of num720 manuals in english.
My e-mail is [email]scurtu.alin@yahoo.ro[/email]!
Re: SCM Record 1 manual, infos, downloads ?
Hello
NUM 720 allows Drip Feeding (DNC) to CNC, from DNC rs232 connected to pc?
I need a copy of NUM 720 controller manual in english, if possible.
My e-mail: [email]nnd_1@yahoo.com[/email]
Re: SCM Record 1 manual, infos, downloads ?
Hello,
NUM 720 allows Drip Feeding (DNC) to CNC from PC?
Could i have a copy of NUM 720 controller manuals in english?
My email: [email]nnd_1@yahoo.com[/email]
Thank you,
Re: SCM Record 1 manual, infos, downloads ?
Can any body please me troubleshoot our 2nd hand scm record 125 with xilog plus software. Calibration cannot be completed. PLC54 UDFXR REFERENCE U. VFRKTXI alarm will come on the screen and cannot be reset. My company is also looking to buy operation manual and troubleshooting guide for this equipment. Ty
Re: SCM Record 1 manual, infos, downloads ?
Hi, the error generally means fault of a motor. For further details you need to check your documents inside the machine. Also if you could provide the machine serial number.