Does the dust hood have pneumatic cylinders to raise and lower it? There should be a sensor to detect when it's all the way up.
On our Morbidelli, screws occasionally get loose, which throws off the alignment of the sensor.
I'm currently running an SCM Routech Record 125 and I have just started getting the PLC 50 Hood Fault error code and I cannot find any information on this particular fault.
Any one have any ideas on what might be causing this fault?
Any help would be greatly appreciated.
Similar Threads:
Does the dust hood have pneumatic cylinders to raise and lower it? There should be a sensor to detect when it's all the way up.
On our Morbidelli, screws occasionally get loose, which throws off the alignment of the sensor.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)