Call Busellato. They should be able to tell you what the issue is.
This is the second time we have had this issue where I work. Our machine (Busellato Jet 6000XL, Running Genesis) just starts flashing this error message and now we can't use it at all. The last time we had this problem, we shut it down and came back the next day and it worked fine. Today I have rebooted the system several times with no success. It gives the error as shown in the title, but when I look this error up in the machine logs it also says "Solenoid_Valve_Unloading_Device_Up". After manually toggling the on screen button a few times I have located a pneumatic relay/actuator that lights up each time but I cant seem to find anything wrong with it. Need Help Please!
Similar Threads:
Call Busellato. They should be able to tell you what the issue is.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)