Need Help! SCM PRATIKA 310


Results 1 to 3 of 3

Thread: SCM PRATIKA 310

  1. #1
    Registered
    Join Date
    Jan 2017
    Location
    Australia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default SCM PRATIKA 310

    Only had machine for 6 weeks...I'm a new player slowly fumbling forward.
    Small problem someone may be able to help guide me through. Machining yesterday power went down. So reset everything calibrated ...all good . But the tool was never returned back to tool rack holder position 2 due to power failure .. So now have to get machine to return cutter, this is my problem. I do know I have to go into MDI F12.... ??? and then I'm lost.
    Thanks in advance
    Darren



  2. #2
    Registered
    Join Date
    Jan 2015
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Re: SCM PRATIKA 310

    One of the button in mdi can open or release tool.
    Mybe you should try iso code M51



  3. #3
    Registered Service SCM BR's Avatar
    Join Date
    Feb 2012
    Location
    Brasil
    Posts
    150
    Downloads
    0
    Uploads
    0

    Default Re: SCM PRATIKA 310

    Is it ok?

    Wood-Authorized-SCM Group, Centauro/Stromab. Unauthorized for Biesse and Masterwood / Alluminium-Authorized-Emmegi Group,.BRASIL. I do not help by Message Private MP


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SCM PRATIKA 310
SCM PRATIKA 310