SCM PRATIKA 310

[Hewn]

Only had machine for 6 weeks...I'm a new player slowly fumbling forward.
Small problem someone may be able to help guide me through. Machining yesterday power went down. So reset everything calibrated ...all good . But the tool was never returned back to tool rack holder position 2 due to power failure .. So now have to get machine to return cutter, this is my problem. I do know I have to go into MDI F12.... ??? and then I'm lost.
Thanks in advance
Darren

[dmitry83]

One of the button in mdi can open or release tool.
Mybe you should try iso code M51

[Service SCM BR]

Is it ok?