Could could create a program to move 1" at 1ipm.
I have the same machine, but don't know how to do it.
I need to manually spin the spindle and I'm having trouble with it. I believe I am on the proper screen, but the help menu informs me that I cannot run any manual tests on the spindle without activation of some sort and this is where I'm stumped. I need to spin the spindle at 18000 for 1 minute. Help!
Similar Threads:
Could could create a program to move 1" at 1ipm.
I have the same machine, but don't know how to do it.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I called SCM. They walked me through it on the F12 screen. They also told me to push reset to stop it. I did, and it didn't stop. It took a few minutes plus a dropped bit but I got it stopped, what a nightmare! Next time I will be calling them back and having them walk me through the process from start to finish, then writing it down.