I got no idea...

[Gary7666]

I got my cnc out and decided to get back into it. I am haveing some problems though. I made a square pocket cut in VCarve. When I run it, it rounds off 2 opposite corners. I put a pic of the tool path in mach3 to help see what I am describing. Any ideas why this would do this? I am at a loss.

Similar Threads:

• Anyone tried this idea
• no idea
• I have No Idea
• EDM idea

[Jim Dawson]

Almost looks like the X and Y axis are cross talking on a Y move. Maybe take a look at the g code and see if there is an X move while Y is moving, could be a setup issue in the post processor. Does Y move when you jog X?

[SignTorch]

Do you have constant velocity on with a high federate and low acceleration ? Try turning CV off and see if the problem goes away.

[Gary7666]

Seems to be something in the gcode. I tried a different project and it worked fine. Thanks for the input!