scm tech z5

[spori]

I have a problem with command n ie programming mjasto stops if Adam only n it goes to -762 and then stops if I give below that for example -600-500 it stops medzutim if enrolled -800 more it moves to the commands for one moment that fit and then again set to -762 could anyone what the problem is not about (scm tech z5) machine in advance apologize in broken English

Similar Threads:

• Need a low tech solution to a high tech problem (kind of urgent)
• need tech in la
• CAD TECH
• Need Help!- SCM Tech 80

[Service SCM BR]

I don't understand your problem. Is in automatic, in Manual. I don't know the majsto. What is this?


Via iPhone of the Tapatalk

[spori]

greeting
that in automatic mode after the end of treatment will go to the default position

[Service SCM BR]

When end the execution the machine stop in the last position. For displacement is necessary add in the final the program the command XN=X????( value different the last position of the execution)


Via iPhone of the Tapatalk

[spori]

I know this but still she could get at these default values XN - ??? and paused for a moment and again set to XN-764 and the fit

[Service SCM BR]

What software are you using? Conductor? If the conductor may be that the settings in options is enabled PARK function at the end of the programs.
But if you use the Xilog Plus it is impossible that happens without you have declared some of XN or PARK functions.


Via iPhone of the Tapatalk

[spori]

- - - Updated - - -

We have cnc scm tech99 and it all works so as to the programming that is not up to that,

- - - Updated - - -

Here's an example

[spori]

and when this PGM file open with maestro and midnight in the record then they want to park at the given position

[spori]

Pardon PGM file

[spori]

has another problem to that nastelujem valves when going head from drilling hit hard in the Buffer Attachment 331540

[Service SCM BR]

But your problem is in the Z5 with masetro or Tech99L with Xilog.

In the Maestro exist the option for PARK in the end of program. Verify this option

[spori]

The problem is z5 xilog

[Service SCM BR]

OK.
Do the following test.
Create a new program in Z5 through Xilog.
He only declares XN = -1000, and see if it performs correctly.

Then create a program in Z5 via Maestro and declare XN = -1200 and see if it performs both correctly.

[spori]

works like this

[Service SCM BR]

So you have no problem in the machine.
Probably you should be saying two different positions or XN + XN or XN + PARK in the program that has the "error."

[spori]

I did not really understand this latest What do you propose to do

[Service SCM BR]

Which part you did not urdestand?
But you told me you ran the test.

In my last post I did not ask anything.
Just said that your machine has no problem what's problem is your program that probably has two positioning information. Verify your program.


Via iPhone of the Tapatalk

[spori]

that part of the xilogu be reprogrammed Moselle explanation

[Service SCM BR]

You know operate and program this machine?
You did a training with a SCM technician when the machine was installed?
I asked you to do two new programs directly on the machine and test.

I did not say reprogram Xilog.

And you told me it works like this.
With this answer I understand that you ran the two tests.
And then you tell me you did not understand.
After you performed the two testing programs or not?

Again explain the two programs that you must create and run the machine and inform the end result of each.

Create a new program in Z5 through Xilog.
In the first declares XN = -1000, and see if it performs correctly.

In the second program in Z5 in the Maestro and declare XN = -1200 and see if it performs both correctly

We need to have a clearer and more objective communication to I can help you and you be helped.
Because if it does not happen it is hard to help resolve the problem.
But advance ever say that your machine has no problem. And yes the program (s) you did.


Via iPhone of the Tapatalk

[spori]

Hello