Need Help! Biesse Rover - Error during Homing of Machine


Results 1 to 13 of 13

Thread: Biesse Rover - Error during Homing of Machine

  1. #1

    Default Biesse Rover - Error during Homing of Machine

    Dear All,

    I have problem during Homing of Machine, Homing of Z-axis is fine, follow by X-axis then the problem occurred, machine stop.

    Already check and bypass the safety mats, didn't find any solution for the error.

    Error show - PLC 9010 > Cycle stop from RH safety area device
    PLC 9943 > if the machine remains in suspension, reset the safety mats by pressing one of the area selection buttons or the power button.

    Need help !

    Thank You.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Biesse Rover - Error during Homing of Machine-img_2400-jpg  


  2. #2
    Registered
    Join Date
    Jan 2017
    Location
    Canada
    Posts
    44
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    i have the same error .... does someone know the solution
    Does we can disable the safety mat ... (please i know what i am doing and people who just want to answer ....whoua ! you are crazy disabling the mat ... just don't answer ...)


    Any help grantly apreciate ...



  3. #3
    Member
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    Find the input in the schematics, get the module number and check to see if it is true. (light for input is on), then remove the wire.



  4. #4
    Registered
    Join Date
    Jan 2017
    Location
    Canada
    Posts
    44
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    Thanks Bob ... does in the lectric plant we find a section talking about the safety mat ?



  5. #5
    Member
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    I dont know, its all in french so I may be missing it but I checked and couldnt find it.

    Its probably the mesh guards.... but they are jumped out on your machine.



  6. #6
    Member
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    Quote Originally Posted by bevins View Post
    I dont know, its all in french so I may be missing it but I checked and couldnt find it.

    Its probably the mesh guards.... but they are jumped out on your machine.
    input 58189 Violation of left working area. I think thats it. Check your module 10 on the machine chassis.



  7. #7
    Registered Miz's Avatar
    Join Date
    Sep 2011
    Location
    United Kingdom
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    Hi,

    How have you disabled the mats?
    If you have bridged the cables going into the mats (and you have done that correctly) you may have a faulty mat control module.



  8. #8
    Member
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    Quote Originally Posted by Miz View Post
    Hi,

    How have you disabled the mats?
    If you have bridged the cables going into the mats (and you have done that correctly) you may have a faulty mat control module.
    It was jumped and it is working on his machine now.



  9. #9
    Registered
    Join Date
    Jan 2017
    Location
    Canada
    Posts
    44
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    base on the electric plant was simple to jump the mat safety ...



  10. #10
    *Registered User* Bob80's Avatar
    Join Date
    Jun 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    Someone can explain me how to make the bridge.
    My Machine (biesse rover C) is completely blocked.
    Error show - PLC 9009

    Thank you!



  11. #11
    Registered CNCGUY520's Avatar
    Join Date
    Aug 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    im having the same issue with my machine rover C



  12. #12

    Default Re: Biesse Rover - Error during Homing of Machine

    Hi Bob,

    Did you manage to get a fix for this issue? I am faced with the same problem, I am certain all my mats are working correctly though as we have tested them and watched the control modules etc. everything seems to be in working order??

    Please let me know how and if you managed to overcome this issue!

    Best Regards,

    Brad

    Brad


  13. #13
    Member AJEH's Avatar
    Join Date
    Sep 2020
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover - Error during Homing of Machine

    Hi Brad,

    Did you solve the problem, I dont know what to do?

    Best regards,

    Alejandro



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Biesse Rover - Error during Homing of Machine

Biesse Rover - Error during Homing of Machine