I have a Morbidelli Author 503, serial number AL1541, year 1994 in my warehouse on a pallet. It has been there the last three years and had limited use prior to that. If this piece of machinery is of interest let me know.
Thanks,
Tom Edwards
Hi guys.
I wantet to hear if anyone knew a place where i can buy a used electro spidle
for my morbidelli.
the thing is that i bought this morbidelli for a little under 10,000$ and a brand new SCM electro spidle cost 20K and if i wantet to have the ball bearings change in my old one i have to pay 12K doest quite seem fair when you can buy a hole used machine for 10K....
So if any of you guys now where we can buy a cheap used or renovated for a fair price please dont be shy.
And if anyone knows a company that can renovate a electro spidle in Vietnam that would be great if i could get a link.
Thanks for looking guys.
Btw
i have 2 Balestrini spiders from 1996 and 1998 5 akses both of them
1 morbidelli author 503 with side tool changer.
2 natchi robots
if you got any of these cnc machines and need help please write and ill help as best as i can.
Best regards
Flemming
Vietnam ho chi minh
Similar Threads:
- Need Help!- Morbidelli Author 502
- Morbidelli Author 213
- Morbidelli Author 344
- Need Help!- Morbidelli Author 430
- Need Help!- morbidelli author 504
I have a Morbidelli Author 503, serial number AL1541, year 1994 in my warehouse on a pallet. It has been there the last three years and had limited use prior to that. If this piece of machinery is of interest let me know.
Thanks,
Tom Edwards
Are you able to help me with my issue on a morbidelli author 503?
Morbidelli Author 503 Dado Motor Configuration
Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
We had the infamous battery issue and lost everything. So starting from scratch and we are almost back to where we were at except we can't get the dado motor to turn and cut on the Y plane. It is setup as tool #80 & #81. It cuts fine in the X plane but it won't turn to cut in the Y axis.
Please any help would be greatly appreciated!!!
Kind Regards,
Rick
Hi Tom,
Do you still have this machine sitting around?
Hi Flemming,
I have an morbidelli Author 503 that I am having plc issues with. Do you have parts or can you offer any advice?
Rick
Hi Flemming,
are you still with the morbidelli? I have a factory in Cu Chi and we have a Morbidelli Author 502 which is running but having error with the Z axis
Hi all,
I need help please. I am setting the PLC's on an Author 503, I have the disks and steps. The password "MORBI" let me do most of the installation, but when I do step 5( 5-INSERT PARAMETER'S DISK, EDITOR, PARAMETERS, LOAD ALL) and press the "EDITOR" button I get an error message "PASSWORD NOT RECOGNIZED". Does anybody know what password is needed for this step. SCM Australia is just ignoring my request for help.
Any help will be greatly appreciated.
Thanks
Piet
Try "ESAGV" or "KVARA2000"
Hi,
Thanks for the reply mate. I eventually got back to the machine today and it is till not working with these two passwords either. I am so frustrated with this machine and the whole secrecy from the makers around it's setting up.
It looks like I will have to retro fit with Mesa cards in the end. Then at least we will never have the battery and plc problem again.
Thanks
Piet
Hi all,
I found the issue. The two part back door password I had was for the wrong version of tria. I hope this help somebody else in future
Passwords are as follows
TRIA7500 REL.38.2.XX.X - 1194121 (SPACE) 1195457
TRIA7500 ReL.38.2.XX.1 - 1229049 (SPACE) 1195457
TRIA7500 REL.38.1.XX.X - 1193479 (SPACE) 1195457
TRIA7500 REL.38.3.XX.1 - 1189527 (SPACE) 1195457
Good luck
Piet
Great to see a follow up!
Currently thinking about getting a Morbidelli Universal X5. Any insight into them while I'm here? haha
I bought Morbidelli A503 year 1994 but I don't have PLC file to recover it. Could anybody help? My email: fma@onet.com.pl