How i can have my own title on the"MetalWorking Machines "?

[Kong123]

Hello,
I have a question about the CNCZONE forum .
How my forum title can be showed in the following column?
" MetalWorking Machines
Discuss MetalWorking Machines here!"

just like the following example
"Syil Products Discuss Syil milling machines and conversion kits here!"

i want to have my own title place like that above "Syil Products"

Please let me know how i can do it successfully. Thank you.

In the attachment you will find two pictures you will know my meanings.

best regards

Kerry
kerry@diylife.com.tw

[rowbare]

Typically, dedicated forums are reserved for companies whose products are generally available and widely used and discussed by the users here. Otherwise you end up with an endless list of forums that don't get any traffic and that is not a good thing.

Once that is the case you can ask the Administrators to create a forum for your products.

[Kong123]

Typically, dedicated forums are reserved for companies whose products are generally available and widely used and discussed by the users here. Otherwise you end up with an endless list of forums that don't get any traffic and that is not a good thing.

Once that is the case you can ask the Administrators to create a forum for your products.

Thank you sirs.
But how can i contact the Administrators?I need you help.

Best regards

kerry
kerry@diylife.com.tw

[Al_The_Man]

How large a customer base do you already have?, this type of forum is intended for discussion of features and remedy of possible problems that may occur on a particular manufacturers machinery or equipment.
It is not intended or allowed to become an advertising forum for the manufacturer.
If there is too small a current customer base at present, or you have to few sales so far to warrant a forum, it may be considered not worth making yet another sub forum at this point.
Al.

[Kong123]

How large a customer base do you already have?, this type of forum is intended for discussion of features and remedy of possible problems that may occur on a particular manufacturers machinery or equipment.
It is not intended or allowed to become an advertising forum for the manufacturer.
If there is too small a current customer base at present, or you have to few sales so far to warrant a forum, it may be considered not worth making yet another sub forum at this point.
Al.

Thank you sir.
We have large customer we think.
We are not intended to have an advertising forum and we just want to have a sub forum to discuss product problems.

Please we want to have a sub formun to discuss our products or remedy of possible problems.
Sir,please let us know how do this sucessfully and we need your guidings.Thank you very much.

[LeeWay]

Well.....whats your product? We can get that discussion rolling right here to see if it warrants it's own title thingy.

[CNCadmin]

Thank you sirs.
But how can i contact the Administrators?I need you help.

Best regards

kerry
kerry@diylife.com.tw

Email me at paul@cnczone.com

[ihavenofish]

How large a customer base do you already have?, this type of forum is intended for discussion of features and remedy of possible problems that may occur on a particular manufacturers machinery or equipment.
It is not intended or allowed to become an advertising forum for the manufacturer.
If there is too small a current customer base at present, or you have to few sales so far to warrant a forum, it may be considered not worth making yet another sub forum at this point.
Al.

they actually have representation here already. novakon sells their machines. i think having a second forum with the same equipment would be confusing and redundant.

i also do not want to see thread after thread of borderline or blatant spamming of advertisements.