Huanyang 7.5 kw VFD help

[creativewood]

Can someone please help me. I went into my control setting on the drive and now I can't get back into it. I have pushed every button on the control panel and nothing works. My display shows 0.00 and the light on the remote/local is lit along with the voltage. I don't have anything connected to run remotely . I'm dead in the water. There must be a way to get back into the drive by pushing certain buttons in a particular order. I will offer a REWARD if your able to help me get back in. . Its that or purchase another drive. Its a GT series Please help

Similar Threads:

• Another Huanyang VFD question
• Need Help!- Huanyang 2.2kW VFD.
• Huanyang VFD
• Need Help!- Huanyang VFD
• huanyang burn!!help

[mactec54]

Can someone please help me. I went into my control setting on the drive and now I can't get back into it. I have pushed every button on the control panel and nothing works. My display shows 0.00 and the light on the remote/local is lit along with the voltage. I don't have anything connected to run remotely . I'm dead in the water. There must be a way to get back into the drive by pushing certain buttons in a particular order. I will offer a REWARD if your able to help me get back in. . Its that or purchase another drive. Its a GT series Please help

Can you still get into the Parameter setting mode

You need these Parameters set at Zero

PD000=0
PD001=0
PD002=0

[mactec54]

creativewood

Something else to try is with the power off remove the control panel, unplugged Etc from the Drive, then reinstall it

[creativewood]

I can give that a try. This is a video I just sent to the distributor to see if they might shed some light.https://vault.myvzw.com/webcs/app/sh...ite/Yr8UFFrHwT