Cincinnati Arrow error 9036 HELP!

[cncwork]

Hello,



Can anyone help with this alarm error 9036 static RAM file system corrupted?
It discription in the manual is (There is a proplem with the C: drive file system possibly due to a battery failure.

These machines are 1994 cincinnati milacron arrow 500 that have a control techniqes interface

The alarm comes up while booting up and can not go further. I have two of these machines that are idenical one is running.

Thanks in advance for your help.

CNC Programming, Inc.
cncprogram@comcast.net
253-514-1047

[scudzuki]

According to the operating manual, error 9036 static RAM file system corrupt,
"There is a problem with the C: drive file system, possibly due to a battery faliure. Use test mode to check the file system. See section 5.3"
Unfortunately, these are the worst laid out manuals I have ever seen, and although there are quite a few section 5.3s, none that I have found in ANY of the 4 manuals have anything to do with diagnosing this error. If you have not done it already, you should record the axis parameters for the machine. I will email you the info I have for recording/entering those parameters.

Joe

[cncwork]

Hi Joe,

Thank you for your help. Looks like I need to be prepared to have a pc with Dos installed.
I'll keep you updated on my progress.

CNC Programming, Inc.
Matt

[Stickerman]

It's been a couple of years ago, but I had a memory error on my CT control. Maintenance Technologies had me download the files to my PC then copy them back onto the control which fixed the error.

Give Maintenance Technologies a call and they will walk you through it. www.maint-tech.com