Help with Alarm code Arrow 750

[Joefizz]

Dose anybody know anything alarm code 40-33
Output/Fuse Failure In APC Rack 0.
Cause: A fault condition was detected in one or of the output
devices in APC Rack 0.
I changed the computer battery then when I restarted this alarm came up.
I can't find any help in the manuals.
Thanks
Joefizz

[dmerrll]

I am expecting my realtime board to come back from Siemens either today or monday. It is not the CMHD board as I sent this in as well. Real time board is where the problem was. I also had to change battery in the board. So i thought it might have been the Bios. If so maybe someone could enlighten us as to how to change the batteries Maybe in the R/T board we should only change when powered up. I will repost when I get the board back if this in fact fixed the 40-33 alarm
David
PS I have Acramatic A2100Y R/T 3-424-2168A 1999

[Joefizz]

The problem is fixed. The R/T board needed to be flashed.
Mark Nichols form Cincinnati Milacron was a huge help.
He explaned to our IT guy what had to be done.
We flashed it Now all is good.
We also changed the clock battery (not the one on the R/T board).
It was on another board. We needed Mark's help with settings that were lost.
Again a huge help. Mark knowes his stuff.
All systems are working now.
All is now right in my world!!

[skasat]

cincinnnati arrow vmc 750 alarme code 39-26
the problem is when i start auto reglage of intilisation paramettre machine !
alarme 39-26 to axe X and Y is not in avabel postion ; i regled this maniellement but not passt every time the sayme alarme code 39-26
i need any help plaise
thanks
skasat