| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Cincinnati CNC Discuss Cincinnati CNC machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-21-2008, 04:05 PM
| |||
| |||
I have a machine in the over travel position in Z I understand I need to hold the control button in to keep the Hydraulics on but it show a button to push in the manual to press to remove power feed inhibit I can't figure out what button I am to push so I can us the hand wheel and move the machine off the over travel If anyone could help me with this it would be a big help Thanks    |
|
#2
12-22-2008, 08:06 AM
| |||
| |||
| I assume you are talking about a VMC, not sure what you mean by hydraulics. Hold the master start button then jog the axis down, also if the machine is a VMC and the tool carosel is not fully retracted it will inhibit the z axis from moving down. Rick |
|
#4
01-05-2009, 04:47 PM
| |||
| |||
| NO IT IS NOT THE DATA SET BUTTON IT IS THE MACHINE POWER ENABLE GREEN BUTTON THE ONE THAT YOU TURN YOUR CONTROL ON WITH WHEN YOU POWER IT UP. THEN USE THE -Z AXIS JOG BUTTON NOT THE HANDWHEEL. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| acramatic 2100 control | greg b | General CNC (Mill and Lathe) Control Software (NC) | 11 | 06-01-2009 04:33 PM |
| Need Help!- Acramatic 2100 | mblazenby | Tree | 4 | 02-05-2009 08:30 AM |
| Acramatic 2100 help!! | SBAGHAEI | Cincinnati CNC | 8 | 11-28-2008 10:53 AM |
| Need Help!- siemens acramatic 2100 control | jptalon | General CNC (Mill and Lathe) Control Software (NC) | 1 | 11-22-2008 06:29 PM |
| Acramatic 2100 control parts | VSMIGuy | General Metal Working Machines | 3 | 02-19-2007 02:23 PM |
| | |
Linear Mode
