Access Nt on a 2100

[aiiguy]

I have an Arrow 500 with an Acramatic 2100 control.
I want to access NT to do some system maint.
How do I get out to Windows?

Thanks,
John

[laka]

I forget exactly how to do it, but i've done it before.

Best way would be to make a boot disk and set the bios to boot from floppy first. Then you'll get to dos where you can do whatever you'd like.

[Rob_N]

Under the Service tab you can bring up the command line, then from there you can use dos commands to pull up various windows