Need Good Program for Acramatic 2100

[Bradan Eudy]

Can someone please post a copy of a good program for the acramatic 2100 controller. So I can edit my post processor with. With beginning headers, drill cycles and end of program code so it goes back to the top when the program is finished.

[coop31]

Hope this helps..

:
G90G45
G00X0Y0Z3.H1
N1 ;(PROGRAM = C3.HMI)
;(PROGRAM BY = COOP )
;(DATE = 4/4/2012)
;(TIME = 9:6)
;(TOOLPATH TYPE = DRILL = 1)
;(COMMENT = No Text)
N2
M6T20
;(TOOL_NAME = CD)
S1500M03
M08
;(CYCLE 1 - SPOT DRILL )
G81 X.5906Y-.3937Z1.0711R1.2811W0.0F5.
G80
M01
;(TOOLPATH TYPE = DRILL = 2)
;(COMMENT = )
N3
M6T19
;(TOOL_NAME = 23/64)
S1000M03
M08
;(CYCLE 2 - HIGH SPEED PECK)
G83 X.5906Y-.3937K.1Z-.1689R1.2811J11W0.0F4.5
G80
M01
;(TOOLPATH TYPE = PROFILE = 3)
;(COMMENT = )
N4
M6T17
;(TOOL_NAME = CHAMFER)
S3500M03
G00X.5906Y-.3937Z3.
X.3406Y.325
Z1.1711
G01Z1.1211F10.5
Y.3125F35.
G03X.5906Y.0625I.25J0.
G01X1.1561
G02X1.2003Y.0442I0.J-.0625
G01X1.2253Y.0192
G02X1.2436Y-.025I-.0442J-.0442
G01Y-.7564
G02X1.2253Y-.8006I-.0625J0.
G01X1.2003Y-.8256
G02X1.1561Y-.8439I-.0442J.0442
N5 G01X.025
G02X-.0192Y-.8256I0.J.0625
G01X-.0442Y-.8006
G02X-.0625Y-.7564I.0442J.0442
G01Y-.025
G02X-.0442Y.0192I.0625J0.
G01X-.0192Y.0442
G02X.025Y.0625I.0442J-.0442
G01X.5906
G03X.8406Y.3125I0.J.25
G01Y.325
G00Z3.
M01
G00Z3.
G00X0Y0G46
M02

[Bradan Eudy]

For some reason the m02 isnt working and at the end of every program it disapperas and I have to re-load it everytime. Its geting really annoying.

[John_B]

Turn Multi-Setup off to get the program to stay put. When that is on, the machine is expecting to switch to another set-up, which would normally use a different program.

What CAM software are you using, I may be able to help you out if it's Mastercam.

Rgds,
John B

[Bradan Eudy]

I have mastercam and bobcad. I couldnt get mastercam to spit out a program that would work with these machines. i dont have much experience with mastercam. But bobcad had a decent post processor but Im spending about a half hour manually editing every program. We make extremely complicated one of a kind here and this is eating my time up.

[laka]

PM me your email address, I have a Mastercam X post that will work fine