NEED Cincinnatti Arrow 1500 O9000 programs - CNCzone.com-The Largest Machinist Community on the net!

cforcht · #1 12-02-2011, 06:13 AM

Just bought this machine. from what I can tell everything works except the tool change routine. after doing a bit of research it appears the 9000 series programs were dumped somehow. along with everything else in the memory. does anyone have a copy of these programs? mine has the fanuc 18i control. your help would be greatly appreciated. thanks.

laka · #2 12-03-2011, 04:09 PM

Probably a long shot, but I have the O9000 toolchange program for a Sabre 750 with Fanuc 0M control. Not sure if it'll be any use for your control?

cforcht · #3 12-03-2011, 05:33 PM

something is better than nothing. are there any other 9000 series programs in your machine? thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Large CNC 1500 x 1500 x 2000 mm - any help ?	KTM	Europe Club House	22	09-10-2011 02:10 AM
Giant 5 Axis Cincinnatti Video	Dan Falck	LinuxCNC (formerly EMC2)	3	09-20-2008 02:29 PM
Mastercam Post processor for Cincinnatti lathe	kamran67	Post Processor Files	2	02-06-2008 05:08 AM
O9000 Tool Change Macro	omkargupta	Fanuc	1	09-11-2007 04:34 PM
O9000 Tool Change Macro	omkargupta	Fanuc	1	09-10-2007 04:41 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)